Mar 11 2010, 12:40 AM
Post
#1
|
|
![]() Man at arms ![]() ![]() ![]() ![]() Group: Clan Members Posts: 155 Thank(s): 1 Joined: 5-September 07 Member No.: 4 |
Hi All
Can anyone tell me what a really good graphics card would be for BC2. Im currently running a AMD quad core 3.0ghz 8gigs of ram with a nivida 8600 card. Any useful would be great -------------------- |
|
|
|
![]() |
Mar 11 2010, 05:44 PM
Post
#2
|
|
![]() Page ![]() ![]() Group: Clan Members Posts: 67 Thank(s): 0 Joined: 22-November 09 From: Kent Member No.: 4,168 |
i get pretty decent fps on my rig ( which is similar to yours kermit , apart from the gfx card) :
Phenom 2 x4 955 ( @3.8 ghz ) 4 Gig DDR2 1066 EVGA GTX 260 ( the oldskool version with 196 cores not 216 ) 1920 x 1080 res , all settings on high ( no AA or AF as stoopid game wont let me set any more than 1x for each ) get around 60 fps average , occasionally dips to high 30s low 40s @ 6 , BSOD's at windows boot are unlikely to be down to overheating, it is either the cpu or the memory, most probably the memory. ( overheating tends to cause BSOD's during heavy load or extended load such as gaming, usually at the worst possible time ) you can check the temps at boot in the bios ( c2ds are good up to around 85- 90 and the stock cooler is normally pretty capable of cooling the cpu pretty well , just a bit loud ) I have always had AMD cpu's ( as they are much easier to overclock ) but the principles are the same : i would suggest that you lower your memory divider before increasing the fsb , as increasing the fsb will automatically overclock your ram ( as ram speed is a multiple of the FSB in core 2 setups ) , so underclocking your ram before you increase the fsb gives you a bit of breathing space to oc the cpu without overclokign the ram at the same time. if you are not playing with voltage clocking your cpu is pretty safe as they will auto shut off if they get too hot, but you would be lucky to get it from 2.4ghz to over 3 ghz without some extra juice |
|
|
|
kermit Graphics Card Mar 11 2010, 12:40 AM
MonkeyFiend Depending on budget am fairly sure anything 8800 o... Mar 11 2010, 01:19 AM
fido77 QUOTE (MonkeyFiend @ Mar 10 2010, 07:19 P... Mar 11 2010, 12:46 PM
Kadey Yeah, from the sound of things as long as its got ... Mar 11 2010, 08:42 AM
Magik5 higher end of the market id say ati 5850 - can be ... Mar 11 2010, 10:16 AM
kermit Thanks guys now i have a idea of what to get thank... Mar 11 2010, 10:31 AM
Kadey Just to provide a bit of balance - the GTX 260 is ... Mar 11 2010, 11:05 AM
Magik5 sounds about right, not sure if the nvidia drivers... Mar 11 2010, 12:55 PM
fido77 i have evga, and the fan is set to always be at 10... Mar 11 2010, 01:34 PM
K. maybe people should post cpu,eme and gfx card then... Mar 11 2010, 01:40 PM
MonkeyFiend ePenis alert!
CPU: Core i7 3.0g clocked to ar... Mar 11 2010, 02:53 PM
Magik6 I was trying to overclock my cpu to get a better f... Mar 11 2010, 03:05 PM
MonkeyFiend depends on what you're clocking from/to and wh... Mar 11 2010, 03:10 PM
Magik6 I'm overclocking a Q6600 to 3.0ghz which I und... Mar 11 2010, 03:22 PM
MonkeyFiend urggh ignore me if this becomes too nerdy... you... Mar 11 2010, 03:38 PM
Magik6 Yeah that is one thing I'm affraid of, not in ... Mar 11 2010, 04:39 PM
Magik5 i get about 45-50 fps at 1920x1200
Q6600 G0 @ 3... Mar 11 2010, 06:03 PM
kermit From what i can read that everyone post comp good ... Mar 11 2010, 08:57 PM
Kung QUOTE (kermit @ Mar 11 2010, 12:40 AM) Hi... Mar 11 2010, 10:07 PM
Magik6 Ok an update on my situation. I tried to OC again ... Mar 11 2010, 11:03 PM
Magik5 like i said try updating your bios and see if that... Mar 11 2010, 11:21 PM
fido77 this is what i'm workin with:
Manufacturer: A... Mar 12 2010, 03:41 AM
Magik6 Tried to OC again after updating the bios and the ... Mar 12 2010, 12:28 PM
Magik6 Double post Mar 12 2010, 12:28 PM
McJaffa If you post some more specs: motherboard model/cpu... Mar 17 2010, 12:41 PM
Magik6 Cheers dude, I'll post the spec when I get bac... Mar 17 2010, 01:02 PM
McJaffa No probs. From personal experience cooling may be ... Mar 17 2010, 02:22 PM
Magik6 I run my pc with its case open so cooling in the r... Mar 17 2010, 03:11 PM
Magik6 Mobo: Asus Commando
CPU: Intel Q6600 (not the GO m... Mar 17 2010, 07:02 PM
McJaffa Well, I spot 2 things first off:
1) It looks like... Mar 17 2010, 10:30 PM
McJaffa Oh, and install coretemp, you may think your case ... Mar 17 2010, 10:34 PM
McJaffa Off topic: Do you always wear all the elbow/knee p... Mar 22 2010, 06:02 PM
Magik6 I do have problems with my knees, its a hereditary... Mar 22 2010, 06:20 PM
McJaffa Not as often as I should, what with being a lazy o... Mar 22 2010, 07:03 PM
Magik6 We went on a holiday to Afan (where the pic was ta... Mar 22 2010, 07:22 PM![]() ![]() |
|
Lo-Fi Version | Time is now: 30th November 2025 - 08:00 PM |